FEULING HIGH LOAD premium performance BEEHIVE valve springs handle up to 750 lift camshafts. Designed for steep ramped large lift camshafts - These Feuling valve springs are made from premium stress relieved conical ovate wire with a nitrided surface heat treatment, shot-peened surface enhancements along with a Nano Peen polish. They have an extremely high level of fatigue life and are designed to handle the highest demands of performance engines with high lift, steep ramped camshafts. Dyno proven and track tested.
FEULING BEEHIVE valve spring kits are each hand measured and labeled specifically based on their coil bind / required open height. Our kits require you to measure installed height and may require use of included shims. This is so you can set up the springs specifically to your camshaft lift for quieter and smoother performance. Similar to tuning your suspension to your weight and riding style.
FEULING BEEHIVE valve springs use a much smaller and lighter weight retainer which drastically reduces the valve weight creating a much quicker revving and smoother motion than comparable dual valve springs.
FEULING HIGH LOAD springs allow up to 750 lift cams, no rocker box clearancing required.
Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics!
Available for 5/16 and 7mm valves
Kits include: FEULING HIGH LOAD BEEHIVE valve springs, lightweight 10 DegreeTitanium retainers manufactured from Ti-17 alloy and micropolished for enhanced fatigue life, machined heat treated chrome moly spring seats, seat shims and valve locks and a set of premium Viton valve seals equipped with a spring loaded valve stem wiper system.
Dont get stung by inferior valve springs!
Quicker Revving - Smoother Motion - Light Weight Ti Retainers - Fit up to 750 Lift Camshafts
SEAT Lbs. / INSTALLED HEIGHT
217 Lbs @ 1.789 (0.574 Lift)
215 Lbs @ 1.800 (0.585 Lift)
208 Lbs.@ 1.819 (0.604 Lift)
200 Lbs @ 1.845 (0.630 Lift)
185 Lbs @ 1.900 (0.685 Lift)
170 Lbs @ 1.935 (0.720 Lift)
415 Lbs @ 1.215 OPEN HEIGHT
Coil Bind @ 1.125
FITS:
EVO/Twin Cam Big Twin 84-04,XL 86-03, Buell 95-02, 10 Degree Std. 5/16 valve stem and keeper groove - 200+ Lbs seat pressure, includes Springs, Ti Retainers, Seats, Seals, Keepers, seat shims
COUNTRY OF ORIGIN:
USA
Disclaimer: Qualified Manufacturer Declared Replacement Part means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.
