465 CAM - The 465 Reaper is an accelerator, producing solid bottom end performance with substantial gains above 2,800 RPM when compared to stock. This direct bolt in replacement for Milwaukee Eight engines can be used with stock valve springs, pushrods, lifters and exhaust. Will respond well with slip-on mufflers and or performance exhaust system and air cleaner. Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train See Feuling #1107. This cam will also respond well with increased bore and or compression. RPM range 1,850 - 5,950. Grind: 465
Intake: .445 Valve Lift, 4 Open, 23 Close, 207 Duration @ 50, .100 lift @ TDC, 99.5 Lobe Centerline
Exhaust: .465 Valve Lift, 50 Open, 6 Close, 236 Duration @ 50, .100 lift @ TDC, 112 Lobe Centerline
*Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio
DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VECHICLE
Feuling® does not recommend tuning beyond stock emissions standards.
Milwaukee Eight 17 - 19, 465 grind cam, 445 Intake lift, 465 Exhaust lift, direct bolt in replacement chain drive, can be used with factory valve springs, pushrods and lifters. RPM 1,850-5,950
Disclaimer: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. Not legal for sale or use on any EPA pollution controlled motor vehicle.