PART # 1377 580" REAPER® high lift cams for XL's are designed for the rider who is looking for more horsepower with a higher RPM power band. Camshafts have .580" lift on both intake and exhaust, require high lift valve springs see FEULING® BEEHIVE® ENDURANCE ® or HIGH LOAD® valve springs, higher compression recommended with performance pushrods and lifters. High flow intake and performance exhaust required.
Fits: '00-'22 XL and '00-'02 Buell as a direct bolt-in replacement for 'fine' pitch pinion gear, cam set also fits '91-'99 but requires pinion gear swap using HD # 24047-00 to convert the '91-'99 'wide' pitch pinion gear to a 'fine' pitch setup.
DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Valve Lift Open Close Duration @ 53" lift @ TDC Lobe Centerline
Intake .580 21 57 258 .193 108
Exhaust .580 67 21 268 .180 113
RPM range: 2,400 - 6,900+ Grind: 580 Overlap: 42
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer:
This is a RACE ONLY part
Parts designated as “Race Only” are for use only on vehicles used for competition racing and are not for use on vehicles registered for use on public roads. Sale and/or installation of “Race Only” parts in any way inconsistent with this warning is prohibited and may result in enforcement by the U.S EPA under the federal Clean Air Act. “RACE ONLY” PARTS ARE NOT LEGAL FOR SALE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EPA POLLUTION CONTROLLED MOTOR VEHICLE.
| Year |
Make |
Model |
| 2000-2003 |
Harley-Davidson |
Sportster 883 XLH |
| 2000-2003 |
Harley-Davidson |
Sportster 1200 XLH |
| 2000-2003 |
Harley-Davidson |
883 Hugger XLH |
| 2000-2006 |
Harley-Davidson |
883 Custom XLC |
| 2000-2009 |
Harley-Davidson |
883 Custom EFI XLC |
| 2000-2003 |
Harley-Davidson |
1200 Sport XLS |
| 2000-2006 |
Harley-Davidson |
1200 Custom XLC |
| 2000-2002 |
Buell |
X1 Lightning |
| 2000 |
Buell |
S3T Thunderbolt |
| 2000-2002 |
Buell |
S3 Thunderbolt |
| 2000-2002 |
Buell |
M2 Cyclone |
| 2002-2007 |
Harley-Davidson |
883 Roadster XLR |
| 2002-2007 |
Harley-Davidson |
883 Roadster EFI XLR |
| 2002-2017 |
Harley-Davidson |
1200 XLCP |
| 2002-2019 |
Harley-Davidson |
1200 Custom EFI XLC |
| 2004-2006 |
Harley-Davidson |
883 XL |
| 2004-2006 |
Harley-Davidson |
1200 Roadster XLR |
| 2005-2006 |
Harley-Davidson |
883 Low XLL |
| 2006-2010 |
Harley-Davidson |
883 Low EFI XLL |
| 2006-2008 |
Harley-Davidson |
1200 Roadster EFI XLR |
| 2006 |
Harley-Davidson |
1200 Low XLL |
| 2006-2011 |
Harley-Davidson |
1200 Low EFI XLL |
| 2007 |
Harley-Davidson |
Sportster 1200 XL 50 |
| 2007-2009 |
Harley-Davidson |
883 EFI XL |
| 2007-2012 |
Harley-Davidson |
1200 Nightster XLN |
| 2009-2012 |
Harley-Davidson |
Sportster 1200 XR |
| 2009-2012 |
Harley-Davidson |
Sportster 1200 X XR |
| 2009-2020 |
Harley-Davidson |
Iron 883 XLN |
| 2010-2020 |
Harley-Davidson |
Forty-Eight XLX |
| 2011-2019 |
Harley-Davidson |
883 SuperLow XLL |
| 2012-2016 |
Harley-Davidson |
Seventy-Two XLV |
| 2014-2017 |
Harley-Davidson |
SuperLow 1200 XLT |
| 2016-2020 |
Harley-Davidson |
1200 Roadster XLCX |
| 2018-2020 |
Harley-Davidson |
Iron 1200 XLNS |
| 2018-2019 |
Harley-Davidson |
Forty-Eight Special XLXS |
Fitment Disclosure
This quick reference fitment information is provided to direct you to our catalog information and the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.
General Safety Warning
Failure to follow manufacturer's recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, LeMans Corporation accepts no liability for loss or damage resulting from errors or omissions. If you believe any of the information provided is erroneous, please email someemail@website.com
| Our Dealers / Distributors |
Part # |
| LeMans Corporation |
0925-0894 |
| Neo Factory |
033616 |
| Parts Canada Development Co |
0925-0894 |
| Parts Europe |
0925-0894 |
