SHORT SUMP PLUG - 6 PACK

0.265 Tall vs. OEM 0.465, pack of 6

$62.95
In stock
3116
765

SHORT SUMP PLUG, 0.265 Tall vs. OEM 0.465, pack of 6

  • HELP ELIMINATE SUMPING ISSUES!

    Eliminate blocking the internal engine case scavenge pick up hole with the FEULING bottom case Short Sump Plug. A common issue with both Twin Cam and Milwaukee Eight engines (more common with Milwaukee Eights) is the sump plug can block off the internal scavenge (return) pick up port. By using a shorter plug, we eliminate the possibility of the plug blocking off this cross port.

    NOTE: The M-EIGHT main sump cross port on the inside of the M-Eight engine case is in a slightly different location & height in each engine case. This cross port is created when the bottom plug hole is machined and tapped by the factory. The machining breaks through the casting wall, creating the sump port. Whereas the Twin Cam engine cross scavenge pick up hole is a machined bore, and is in the same location in every engine case.

    The further the bottom plug installs into the case, the more of the scavenge cross port is blocked off. For optimum oil scavenging & lower sump levels, it is advisable to use FEULINGs new Short Sump Plug which will ensure the cross sump port is wide open and allows the oil pump to pull as much as possible from the sump.

    The FEULING Plug is 0.265 Tall vs. OEM 0.465.

    Part #3115 - Qty. 1
    Part #3116 - Qty. 6


    FITS:

    M-EIGHT 17-24, TC 99-17


    COUNTRY OF ORIGIN:

    USA

    Disclaimer: Qualified Manufacturer Declared Replacement Part means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.

  • Our Dealers / Distributors Part #
    Drag Specialties 0950-0991
    Parts Canada Development Co 0950-0991
    Parts Europe 0950-0991

  • RACE SERIES LIFTERS
    HYDRAULIC ROLLER LIFTERS, Standard OD (0.8420-0.8423),...

    $ 299.95

    HP+ OILING SYSTEM
    HP+ OILING SYSTEM KIT, Gear or Chain drive, TC 07-17...

    $ 829.95

    FEULING TEXT LOGO POINTS COVER
    TC 99 - 17, 5 hole, FEULING Text Logo - Black Contrast Cut

    $ 69.95

    DENSO SINGLE IRIDIUM SPARK PLUGS
    DENSO SINGLE WIRE IRIDIUM SPARK PLUG, TC 99-17 + XL 86-17

    $ 11.95