FEULING® OE+ stock replacement billet camplates are manufactured from 6061 aluminum providing increased rigidity and machined to FEULING's® high tolerance standards. The pressure relief valve and spring are pre-set, matched and seated by FEULING® with a full pop off pressure of 50-60 psi. OE+ camplates are a direct bolt in replacement and will accept the factory oil pump. As with all FEULING® components, the competitively priced OE+ camplates are designed and manufactured to the highest standard of quality with proven FEULING® performance.
Part # 8032 CONVERSION CAMPLATE for TC® ’99 - ’06, Except ’06 Dyna – has the original style ’99 – ’06 TC® cam bearing bores for use with the press in bearings. This camplate is designed to use the new style ’07 – ’15 Factory hydraulic chain tensioner system with the original ’99 -’06 Twin Cam® style camshafts. Great for those who have already upgraded their early style engine and or like their existing camshafts.
Requires the purchase of ‘factory’ hydraulic chain drive tensioners and needed hardware. *'99-'01 engines with Magneti Marelli ignition utilize the stock outer silent chain and rear cam sprocket or will require separate purchase of Andrews sprocket # 216015 which will allow use of the '07-'17 style roller chain.
Camplate includes bearing retainer plate and hardware. For use with '07-'17 style oil pumps, compatible with FEULING® oil pumps: #7030, 7060, 7062
³ Requires purchase of ‘factory’ style hydraulic chain drive tensioners, chains, sprockets & hardware
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer:
“Qualified Manufacturer Declared Replacement Part” means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.
| Our Dealers / Distributors |
Part # |
| LeMans Corporation |
0925-0841 |
| Parts Canada Development Co |
0925-0841 |
| Parts Europe |
0925-0841 |
| Rollies Speed Shop |
FE-8032 |
| Tucker Rocky - Bikers Choice |
480719 |
| Zippers |
672-832 |
