542 CAM - The 542 Reaper is a quick accelerator. Strong and smooth low to mid range torque for 117" engines. Very strong bottom end with substantial gains above 2,500 RPM when compared to stock. This direct bolt in replacement for Gen2 Milwaukee Eight engines can be used with stock valve springs, pushrods, lifters and exhaust. Will respond well with slip-on mufflers and or performance exhaust system and air cleaner. Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train See Feuling #1107. This cam will also respond well with increased bore and or compression. RPM range 2,050-6,000. Grind: 542
Intake: .536 Valve Lift, 8 Open, 25 Close, 213 Duration @ 50", 98.5 Lobe Centerline
Exhaust: .542 Valve Lift, 50.75 Open, 7.75 Close, 238.5 Duration @ 50", 111.5 Lobe Centerline
Overlap: 16
*Cam specs measured in the engine on the lifter @ 0.050" using a 1.61 rocker arm ratio
Feuling® does not recommend tuning beyond stock emissions standards.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer:
This is a RACE ONLY part
Parts designated as “Race Only” are for use only on vehicles used for competition racing and are not for use on vehicles registered for use on public roads. Sale and/or installation of “Race Only” parts in any way inconsistent with this warning is prohibited and may result in enforcement by the U.S EPA under the federal Clean Air Act. “RACE ONLY” PARTS ARE NOT LEGAL FOR SALE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EPA POLLUTION CONTROLLED MOTOR VEHICLE.