FEULING® camshaft kits for Milwaukee Eight engines include chain drive camshaft, lifters and a cam installation kit that includes cam bearing, cam/crank hardware and a gasket/O-ring kit that allows for install of the factory one piece pushrods and or our optional and recommended heavy duty HP+® 0.165" wall one piece pushrods - see # 4087
Feuling fastener kit #3047 is also highly recommend to help prevent cylinder head cracking, this kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress on the rocker shaft standoffs.
HP+® kits come with HP+® lifters and RACE SERIES® kits come with RACE SERIES® lifters
472 CAM - Great all around gains camshaft, Feuling's go to for 114" & 117" looking for a little more than our 465 grind. Great bottom end with substantial gains above 2,750 RPM when compared to stock. Responds very well to increased bore and or compression, exhaust system and air cleaner. Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train See Feuling #1107 or #1108.
Cam Part # 1350
Valve Lift Open Close Duration @ 50" lift @ TDC Lobe Centerline
Intake .468 8 BTDC 25 ABDC 213 .117 98.5
Exhaust .472 50.7 BBDC 7.75 ATDC 238 .110 111.5
RPM range: 1,900 - 5,900 Grind: 472 Overlap: 16
• RACE SERIES® hydraulic lifters have a full .200" of total travel designed with a slower bleed down rate to handle heavy valve spring pressures, increase engine RPM before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the Milwaukee Eight front exhaust camshaft lobe flange.
*Cam specs measured on the lifter @ 0.050" lift with 1.61 rocker arm ratio
EXEMPT FROM EMISSIONS TAMPERING REGULATIONS UNDER CARB EO# D-881-1, 50 State legal CARB compliant: CARB EO# D-881-1
Feuling® does not recommend tuning beyond stock emissions standards.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Disclaimer:
50 State legal CARB compliant: CARB EO# D-881-1
“CARB E.O.” means the specified Executive Order issued by CARB. An Executive Order constitutes an exemption by CARB from CA Vehicle Code 27156 and 38391, for sale of the part number for the make/model/ year fitment(s) specified in the Executive Order.
Disclaimer: Exempt from emissions tampering regulations under CARB EO# D-881-1 for all 2017-2023 M-Eight engine models.
| Our Dealers / Distributors |
Part # |
| LeMans Corporation |
0925-1327 |
| Neo Factory |
033624 |
| Parts Canada Development Co |
0925-1327 |
| Parts Europe |
0925-1327 |
